How to test the Duo using the physical button?

Test mode

• Enter into test mode: Press the button + 2 seconds: 1. (blinking white led: changing status) → Yellow indicates device is in test mode.
• Select the output: short-press → With a short click you will change the output to test (1, 2 or both).
• Confirm the output: long-press → The LED on device will be purple:
• Select the pattern: short-press → You can navigate through the different options pressing shortly again the button.
  • Test patterns:
    • Channel run
    • CH1 - Red
    • CH2 - Green
    • CH3 - Blue
    • CH4 - White
    • All Channels
    • CH1 + CH2
    • CH2 + CH3
    • CH1 + CH3
    • Dynamic
• •  

• Exit Test mode: long-press the button: LED indicator white or restarting the device

☝️ By default the device has 1200 px per output to run the test