The Gate SPI Wired Long-Range features eight outputs that utilize the RS485 serial communication protocol. Each output connects the controller to a receiver located next to the LED luminaires; this receiver is the component responsible for converting the RS485 signal to SPI.
The maximum distance between the Gate and the Receiver is 300 m. However, the Receiver should be positioned directly adjacent to the luminaires, with a distance of less than 30 cm.
The receiver has a width of 76 mm, a depth of 28 mm, and a height of 26 mm. It features two mounting holes on each side, with a center-to-center distance of 65.5 mm, sized for M3 countersunk screws.
The receiver can support a power input of 5 to 24V*. Its operating temperature range is from -40°C to 80°C, making it suitable for a wide variety of environmental conditions.
*For Long Ranges bought before 2024 the range is 5 to 12V
Comments
0 comments
Please sign in to leave a comment.