How to activate the test function by pressing the button?

To activate the test function on the Long-Range controller by pressing the button, follow these steps:

1. Enter Test Mode: Press and hold the test button for 3 seconds. The Mode LED indicator will turn on amber.
2. Select the Output: Once in test mode, press the reset button.
3. Confirm the Output: With a single click on the test button, you can change the output. The test LED will flash blue, indicating the selected output number (one flash for output 1, two flashes for output 2, etc.).
4. Select the Pattern: Press the test button once to select the desired pattern to test.
5. Exit Test Mode: To exit the test mode, press and hold the test button for 3 seconds.

This testing function allows you to check the electric and data installation by sending different pixel channels per output.